Ultra high solids metallised floor polish for prestigious floors. Dries to an extra durable, brilliant wet look finish. Suitable for most floors including vinyl, rubber, asphalt, marble, terrazzo & sealed surfaces.

• Ultra high solids formulation for extra floor protection.

• Excellent levelling properties for smoother application.

• Slip resistant finish for a safer working environment.

• Extremely scuff resistant to make it easier to clean & maintain.

• Responds to high & ultra high speed burnishing.

• Ideal for very heavy traffic areas.

• Coverage per 5lt – 400/500 sq. metres for 1 coat.

Use undiluted.

Pour polish into bucket or tray.

Place mop or applicator into polish, lightly squeeze out surplus.

Apply polish to dry floor thinly & evenly in WEST to EAST direction.

Leave to dry for approximately 30 minutes.

Apply a further coat of polish thinly & evenly at right angles to first, i.e. NORTH to SOUTH. Leave a 10cm gap at floor edge to avoid a build-up.

Leave to dry for approximately 30 minutes.

Further coats may be necessary dependent on the age, porosity of the floor & the type of maintenance system being used.