High solids metallised floor polish. Dries to a very durable, high gloss & slip resistant finish. Suitable for most floors including vinyl, rubber, asphalt, marble, terrazzo and sealed surfaces.

• High solids formulation for extra floor protection.

• Excellent levelling properties to ensure a smooth even coat.

• Slip resistant finish for a safer working environment.

• Very scuff mark resistant to make it easier to clean & maintain.

• Responds to high speed burnishing.

• Ideal for heavy traffic areas.

• Coverage per 5lt – 400/500 sq. metres for 1 coat.

Use undiluted.

Pour polish into bucket or tray.

Place mop or applicator into polish, lightly squeeze out surplus.

Apply polish to dry, neutral floor thinly & evenly in WEST to EAST direction.

Leave to dry for approximately 30 minutes.

Apply a further coat of polish thinly & evenly at right angles to first, i.e. NORTH to SOUTH. Leave a 10cm gap at floor edge.

Leave to dry for approximately 30 minutes.

A third coat may be required in heavy traffic areas or on old or worn floors.